Our P/N: TMCR500 features a HEAVY-DUTY integrated 2 section ramp which folds up and out into 3 different positions. The first position keeps the ramp folded flat to the carrier surface and held down with a spring pull pin. The folded flat position is to keep the ramp self stored and secured when the carrier is folded up. The second ramp position allows the ramp to stand up straight when a mobility device or equipment is on the carrier. The ramp is held vertically in place with a spring pull pin. The last position is the ramp unfolded. This position allows for scooters, power wheelchairs, and just about anything with wheels to be pushed or powered up the ramp.

A welded handle featured on the ramp allows for easy folding and unfolding. Tie down straps can be hooked onto any of the 10 tie down holes featured on the 4 1/4” tall sides. The rear of the carrier has 2 reflectors for greater visibility at night.
Supporting the carrier is the Heavy Duty 2” hitch tube which features 4 bolts, and a safety pin underneath to allow the hitch tube to be removed from the carrier.
The hitch tube has a 5/8” hitch pin hole for securing the carrier to your vehicle and will work on (2" X 2") Class 3 or 4 hitch receivers.

* This carrier is not recommended for smaller 1 1/4” hitches.

Please Note: Mobility devices are not to be occupied when loading, unloading, or on the carrier!
Never exceed the rated capacities of your hitch.